Skip to content

EF 40mm f/2.8 STM Autofocus Problem – Product Advisory

Canon released a product advisory for the EF 40mm f/2.8 STM lens. Looks as if there is a problem with the AF-system: If pressure is applied to the lens barrel while the lens is mounted to the camera (pressure can be applied even while attaching the lens cap or while carrying the camera with the lens attached in a bag), the autofocusing function of the lens may stop working. The issue does not affect all lenses (according to the digital picture). Firmware releases that will address the issue are expected for August.

From Canon USA:

To Users of the EF40mm f/2.8 STM Interchangeable Lens for Canon Digital SLR Cameras

Thank you for using Canon products.

It has been confirmed that the autofocusing function of the EF40mm f/2.8 STM lens, which was released in June 2012, may not operate correctly.

The details of this phenomenon are described below.

Affected Product

EF40mm f/2.8 STM

Phenomenon

If pressure is applied to the lens barrel while the lens is mounted to the camera (pressure can be applied even while attaching the lens cap or while carrying the camera with the lens attached in a bag), the autofocusing function of the lens may stop working.

*This phenomenon does not occur during normal shooting.

*This phenomenon does not result in a malfunction of the lens.

Workaround

When the above phenomenon occurs, detach and reattach the lens, or remove and reinsert the camera battery to restore the operations.

Market Support

The firmware to address this phenomenon will be available for download in late August, 2012.

Once this firmware is ready, we will make an announcement on our Web site.

Support

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

[via thedigitalpicture]
Back To Top

Notice

This website or its third-party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy.
By closing this banner you agree to the use of cookies.