Canon EOS R5 C Firmware Update Released (version 1.0.2.1)

Canon Eos R5 C

Canon released a firmware update for the Canon EOS R5 C, version 1.0.2.1.

Firmware Version 1.0.2.1 incorporates the following fix and enhancements:

  1. Built-in Mic Audio Off The internal microphone on the camera body can now be turned off. (VIDEO mode)
  2. Fixes an issue, in which, in rare instances, the camera cannot be normally operated when operating the REC button with the camera set to the [Continuous Recording] function.(VIDEO mode)
  3. Fixes minor issues when using the CINE-SERVO lens. (VIDEO mode)

Download Canon EOS R5 C firmware version 1.0.2.1 here.

Firmware Update For Canon C70 Released

Video Gear Cinema Eos C70 Firmware Review

Canon released a firmware update for the Canon EOS C70, which resolves an issue that emerged in July 2022.

Canon EOS C70 firmware 1.0.4.1 incorporates the following fix:

1. Fixes an issue, in which, in rare instances, the camera cannot be normally operated when operating the REC button with the camera set to the [Continuous Recording] function.

You can download Canon EOS C70 firmware 1.0.4.1 here.

New Canon EOS R3 Firmware Just Released (1.2.1, after ver. 1.2.0 had been pulled)

Canon Eos R3 Firmware Sample Picture User Manual

Canon already released a new firmware update for the Canon EOS R3, after having pulled the previous firmware update because of an issue.

Canon EOS R3 firmware Version 1.2.1 (download) incorporates the following enhancements and fixes:

  1. Adds the ability to set “Custom high speed continuous” to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps.
  2. Adds the ability to select “FHD 239.76 fps/200.00 fps” in “High frame rate.”
  3. 1- Adds the ability for in camera “Depth compositing” during “Focus bracketing.”
    2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1).
  4. Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording.
  5. Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022.
  6. Adds the ability to convert multiple HEIF images into multiple JPEG images.
  7. Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio.
  8. Adds the ability to crop and resize images during transfer to an FTP server.
  9. 802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format.
  10. Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set.
  11. Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
  12. Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting.
  13. Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth].
  14. Fixes minor issues.
  15. Fixes an issue, in which, after having updated the camera to firmware Version 1.2.0, when performing the [Factory reset] operation, some shooting settings are not retained.

*Items 1 through 14 are changes of Firmware Version 1.2.0, and item 15 is newly added for Firmware Version 1.2.1.

Latest Canon EOS R3 Firmware Update (ver. 1.2) Has Been Pulled (mode dial issues)

Canon Eos R3 Firmware Sample Picture User Manual

It seems Canon already pulled the latest Canon EOS R3 firmware update, version 1.2.

User DrJohnEvs in the DPReview forum writes (emphasis mine):

I installed v1.2 a few days ago and all worked well.

I noticed last night that it had been withdrawn from Canon UK site.

This morning I contacted CPS UK. I have just received a reply saying there is an issue and recommended I go back to v1.1.1

The issue is that if you have v1.2 on your camera and then perform a reset the mode dial does not work correctly and you cannot change between Tv Av etc.

Anyone experienced similar issues?

Firmware Updates For Canon EOS R3 , EOS R5 And EOS R6 Released

Canon Eos R3 Review Canon Cameras Eos R1

Canon released new firmware update for three EOS R cameras, the EOS R3, EOS R5 and EOS R6.

The firmware updates started to be available on Canon’s Asian sites, so we link Canon Singapore for the downloads.

Canon EOS R5 Firmware Version 1.6.0 (download) incorporates the following enhancements and fixes:

1. Adds [Auto Power Off Temp.: Standard/High] to the menu for movie recording. When [High] is selected, the camera will not automatically turn off when the temperature of the camera body and card become high, which may allow for longer movie recording than before, depending on the shooting conditions. Note that the temperature of the bottom surface of the camera may increase at this time.
2. Adds the ability to convert multiple HEIF images into multiple JPEG images.
3. Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
4. Fixes minor issues.

Canon EOS R6 firmware Version 1.6.0 (download) incorporates the following enhancements and fixes:

1. Adds the ability to convert multiple HEIF images into multiple JPEG images.
2. Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
3. Fixes minor issues.

Canon EOS R3 firmware Version 1.2.0 (download) incorporates the following enhancements and fixes:

1. Adds the ability to set “Custom high speed continuous” to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps.
2. Adds the ability to select “FHD 239.76 fps/200.00 fps” in “High frame rate.”
3. 1- Adds the ability for in camera “Depth compositing” during “Focus bracketing.”
2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1).
4. Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording.
5. Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022.
6. Adds the ability to convert multiple HEIF images into multiple JPEG images..
7. Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio.
8. Adds the ability to crop and resize images during transfer to an FTP server.
9. 802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format.
10. Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set.
11. Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
12. Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting.
13. Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth].
14. Fixes minor issues.